Olympus E10 E-10 Instructions (English) - Page 116
Using the Camera Remote Unit RM-1
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Using the Camera Remote Unit RM-1 With the camera in the remote mode, you can release the shutter with the electronic remote unit RM-1 while standing in front of the camera. The shutter will release 2 seconds after pressing the transmit button on the remote unit. OFF ON 4 Eyepiece shutter lever Remote control mark 1 Set the mode dial to P, A, S, or M. 2 Press and hold down the drive 1 button , and then turn the main dial or the sub dial until you see the remote control mark appear in the control panel. 2 3 Mount the camera on a tripod and compose the picture. If the subject is not yet composed in the center of the viewfinder, you can use focus lock. (© 65) If you are going to include yourself in the picture, focus on the area where you intend to appear in the picture. 4 Pull down the eyepiece shutter lever to prevent light entering the viewfinder from behind the camera. Pull down the eyepiece shutter lever on the left of the viewfinder. Light entering the viewfinder from behind the camera could wash out the picture with white light. Working range of the remote unit Use the remote in front of the camera within the range of distances and angles shown below. The following elements could narrow the working range of the remote/self-timer sensor: direct sunlight or any other strong light source, fluorescent light, or any device emitting electrical or radio waves. W T AApppprorox.x.23mm(6(1.60fftt..))((oinudtdoooor)r) Approx. 5m (16.6 ft.) (indoor) 15° W T Approx. 3m (10 ft.) (outdoor) 15° Remote unit T W AApppproroxx. .32mm(1(60.6ft.f)t.()in(oduotodro)or) Camera 114