Olympus E10 E-10 Instructions (English) - Page 130
Setting the Idle Time for the Sleep Mode
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Setting the Idle Time for the Sleep Mode When the camera is set in the P, A, S, or M shooting mode, if it remains idle for a specified length of time, it will enter the sleep mode automatically and switch off the monitor, control panel, and viewfinder displays to conserve the batteries. To restore the camera to full operation, just half-press the shutter button or any other button. If the camera remains idle in the sleep mode for 1 hour, then the camera will switch itself off. If the camera remains idle with the mode dial set to Playback or Print Reserve , the camera will switch itself off after a specified length of time has elapsed. OFF 1MIN 2MIN 5MIN 10MIN Shooting Mode (P, A, S, M) Playback , Print Reserve Mode Setup/ Connection Mode Camera never enters sleep mode. Camera neither enters sleep mode, nor switches itself off. Camera enters sleep mode if it remains idle for 1 minute. Camera enters sleep mode if it remains idle for 2 minutes. Power switches off after 1 minute. Power switches off after 2 minutes. Camera neither enters sleep mode, nor switches itself off. Camera enters sleep mode if it Power switches off after 5 remains idle for 5 minutes. minutes. Camera enters sleep mode if it Power switches off after 10 remains idle for 10 minutes. minutes. Once the camera has switched itself off, you must switch it off and on again to restore full operation. Note • After the camera enters the sleep mode, monitor and control panel go off. If the mode dial is set to setup/connection mode mark or with the AC adapter connected, the camera will ignore the sleep mode setting and not switch itself off, regardless of how long it remains idle. 128