Olympus E10 E-10 Instructions (English) - Page 18

Important Parts and Names (continued) Control panel Flash control ➝ 44, 85 Only (No Flash) is displayed when flash is not in use. Nothing displayed for Auto flash mode. Fill-in flash Slow synchro Flash intensity control Red-eye reduction Record mode (TIFF, SHQ, HQ, SQ) ➝ 103 Image adjustment (sharpness, contrast) ➝ 106, 107 2nd-curtain Shutter speed ➝ 74 Aperture value ➝ 72 Macro ➝ 42 Self-timer ➝ 113 Conversion lens ➝ 133 Battery check ➝ 33 Remote control ➝ 114 Card error ➝ 189 ISO (Displays setting other than AUTO) ➝ 83 White balance (Displays setting other than AUTO) ➝ 100, 101, 102 Manual focus ➝ 68 Auto bracket ➝ 81 Exposure compensation/ Exposure level In the P, A, S modes displays exposure compensation value. (➝ 79) In the M mode displays the exposure level (the difference between the selected and ideal exposure levels). (➝ 77) Metering mode ➝ 78 Digital ESP metering Center weighted averaging metering Spot metering Sequential shooting ➝ 112 Selected memory card SmartMedia CompactFlash ➝ 121 Memory gauge ➝ 40 Displays the amount of camera memory currently in use. One bar lights for every picture taken and remains on until the picture is stored in the card and then goes out. With no bars lit, you can take up to 4 pictures. When all 4 bars are lit, you cannot take a picture. Number of storable pictures ➝ 34 At power on, also displays a percentage for the battery check for the lithium polymer battery. Note • If you half-press the shutter button, the viewfinder display will light on. • After the camera is switched on, you will see "- - " displayed for the aperture, shutter speed, and exposure level settings until you half-press the shutter button. When you release the shutter-button from half-pressing, you will see "- -" displayed again after 8 seconds. 16