Olympus LS-7 LS-7 Detailed Instructions (English) - Page 52

Menu setting method • If too big sound is input, the noise may occur even if [Rec Level] is set to [Auto] or [Limiter ON]. Also, in certain cases the [PEAK] indicator light, which notifies large input, may not light. To ensure successful recordings, we recommend that you test the record function and volume before use. • The level can be adjusted from [01] to [16]. The higher the number, the higher the level and the larger the indicator position on the level meter. About the Zoom Mic function: Directivity (high) Directivity (low) Sound collection (narrow) Sound collection (wide) Zoom Mic The directional microphone function utilizes Low Cut Filter DiMAGIC's (DiMAGIC Co., Ltd.) DiMAGIC The recorder has a Low Cut Filter function to 4 Virtual Microphone (DVM) technology. DVM is an audio pickup system which minimize low-frequency sounds and record voices more clearly. This function can reduce allows you to record by focusing on sound noise from air conditioners, projectors and from any direction. From expansive stereo other similar noises. recording to high directivity recording, DVM represents the latest in directional control methods that can be switched, using the built-in stereo microphone. [300Hz]: Use this setting when sufficient effects cannot be obtained with the [100 Hz] setting. [100Hz]: This setting will reduce the noise generated from air conditioners or projectors. It is effective for indoor recording. [Off]: Disables this function. • When you increase the value, the directivity will narrow. • Decreasing the value widens the directivity, enables you to record in a expansive stereo sound. • If you reduce the directivity and widen the recording range, you can record in a sound with expansive stereo feeling. Menu setting method EN 52