Olympus MAUSB-300 Reference Manual - Page 27
Troubleshooting, PROBLEM, CAUSE, SOLUTIONS, REF.
![]() |
View all Olympus MAUSB-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Troubleshooting Windows PROBLEM The status lamp does not light. 1 If you are using Windows 98/98 SE: 2 A [Add New Hardware Wizard] window appears when you connect the adapter. If you are using Windows 98/98 SE: The adapter doesn't work even 3 after properly completing installation of the device driver and connecting the adapter to the computer correctly. If you are using Windows 98/98 SE: [?] appears in Device Manager. (This is after connecting the 4 adapter to your computer before installing the device driver and then performing all the steps in the [Add New Hardware Wizard] window.) The [Removable Disk] icon does not appear in [My Computer] after installation and connection. [!] or [?] appears in Device Manager. 5 The adapter does not recognize the card. 6 [Please insert a disk into drive.] appears. CAUSE The adapter is not connected correctly to the computer's USB port. The power supply from the USB port is insufficient. The card is not inserted correctly. You have connected the adapter before installing the device driver. The USB port is disabled in the BIOS settings. The device driver is not installed correctly. (It is not necessary to install the device driver on Windows Me/ 2000/XP.) The adapter's USB connector is not connected properly to the computer. The Universal Serial Bus Controller is Disabled. (Only for Windows Me/2000/XP) The USB port is disabled in the BIOS settings. The card is not inserted correctly. SOLUTIONS REF. PAGE Make sure that the adapter is facing the right way and connect it to the computer's USB port firmly. 9, 14 If you are using a USB hub, connect the adapter directly to the 5 computer's USB port. Make sure the card is properly oriented (front/reverse face, top/ bottom part), then insert it slowly into the adapter until it is secure. 8, 13 Click [Cancel] to close the window, then unplug the adapter from the PC and install the device 8 driver. Set the USB port to "Enable" in the BIOS settings. Take extra care when making this setting, referring to your - computer's instruction manual. Delete [? MAUSB-300], then unplug the adapter and install the device driver correctly, and connect the adapter again. 7 Insert the USB connector fully into the computer's USB port to ensure that it is firmly connected. Change the Controller settings on [Universal Serial Bus Controllers] by selecting [Start] - [Setting] (only for Windows Me/2000) [Control Panel] - [System] [Hardware] - [Device Manager]. ([X] appears on the controller's name. Select [Enable] by rightclicking from the pop-up menu.) Set the USB port to "Enable" in the BIOS settings. Take extra care when making this setting, referring to your computer's instruction manual. Make sure the card is properly oriented (front/reverse face, top/ bottom part), then insert it slowly into the adapter until it is secure. 9, 14 - - 8, 13 27
![](/manual_guide/products/olympus-mausb300-reference-manual-ae77d49/27.png)