Olympus MAUSB-300 Reference Manual - Page 7

Windows 98/98SE How to install When you install the adapter, also refer to your computer's user manual and the manuals for any optional devices you are using. 1 Turn on the computer Turn on the computer's power (and connected devices, such as a monitor) to start Windows 98/98SE. 2 Download and install the device driver When using the adapter for the first time, you must first download and install the device driver from the OLYMPUS web site. Before installation, make sure that the computer is turned on, then follow the steps below to install the device driver on the computer. ● Note that the windows shown below may look different on your computer, depending on how your operating system is configured. 1. Open the web site, then follow the instruction to download the device driver. MAUSB-300 Device Driver Web Site : http://www.olympus.com/ Notes DO NOT connect the adapter until installation of the device driver is completed. 2. When you double-click the file you downloaded, the installation setup window appears first. When the [InstallShield Wizard] window at right appears, you can begin installation. Click the [Next] button. ● If you want to cancel the installation, click [Cancel]. 3. During installation, the window at right appears. ● The installation time may vary, depending on the computer you are using. 7