Olympus MAUSB-300 Reference Manual - Page 8

4. When the device driver installation is complete, the window at right appears. Select [Yes,I want to restart my computer now.] if you are ready, then click [OK]. ● The computer restarts. The device driver is now installed. Once the device driver has been installed, the adapter will be recognized automatically whenever it is plugged into the computer. If the [Add New Hardware Wizard] window appears before installing the device driver If you connect the adapter to the computer before installing the device driver, the [Add New Hardware Wizard] window appears. In this case, follow the steps below. 1. Disconnect the adapter from the computer (੬ p. 11). 2. Click the [Cancel] button. 3. Follow the instructions in "2 Download and install the device driver" (੬ p. 7). Operating the adapter The operating procedures for the adapter under Windows 98/98SE are described below. 1 Inserting a card Insert a card into the adapter. Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the way into the card slot. Status lamp Adapter Card slot Notes • Make sure that the card is facing the right way. • DO NOT insert the card at an angle. Forcing a card in diagonally may damage the adapter and/or the card. xD-Picture Card 8