Olympus SP 310 SP-310 Advanced Manual (English) - Page 49
Using the slave flash, aperture on the external flash to match the camera's - advanced manual
UPC - 050332156210
View all Olympus SP 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Basic shooting functions Selecting the flash (QFLASH) 3 Turn on the external flash. • Be sure to attach the flash to the camera before turning the flash on. 4 Set the mode that automatically controls the amount of light emitted by the external flash. Also set the ISO sensitivity and aperture on the external flash to match the camera's settings. • Refer to the manual for the external flash to select its mode. 3 Note • The camera's flash mode will have no effect on the external flash. The external flash will fire even when the camera's flash mode is set to [$] (off). • Confirm in advance that the external flash you are using is synchronized with the camera. Using the slave flash This setting is for when using a commercially available slave flash that is synchronized with the camera flash. The amount of light emitted by the flash can be adjusted in 10 levels. The flash can fire in sequential shooting mode, but the interval between shots will be longer if a high emission level is set. Flash mode automatically changes to [#] for all flash modes except [$]. Top menu [MODE MENU] [CAMERA] [QFLASH] [SLAVE] g"Using the menus" (P. 17) 1 Select an emission level from [1] to [10], then press Z. SLAVE FLASH 1 SELECT GO OK 49