Olympus VP-1 VP-1 User's Manual (English) - Page 30

General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT button while viewing the projected image and select the aspect ratio. Image of the Personal Computer (when selecting digital RGB or analog RGB) Each press of the ASPECT button advances the selection one step in the sequence of Auto → Direct → Real, and then repeats. Auto Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3 Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable size Real Projects the input signal without pixel conversion DIGITAL RGB VIDEO S-VIDEO QUICK ASPECT YPbPr YCbCr AUTO MENU CANCEL Input Signal The setting is higher than the display resolution of the projector. Auto Direct Real The setting is lower than the display resolution of the projector. Image of the Video Equipment (when selecting VIDEO, S-VIDEO, YCbCr, or YPbPr) Each press of the ASPECT button advances the selection one step in the sequence of Auto → Wide → Zoom, and then repeats. Auto While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound- aries of the screen. The top and bottom of the 16:9 image becomes black. Wide Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed image in a proper aspect ratio.) Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.) Aspect ratio selection Auto Wide Zoom 4:3 screen 16:9 screen Note Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image raises concern about the infringement of copyright rights which are protected by copyright law. E-30