Olympus VP-1 VP-1 User's Manual (English) - Page 54

View Keystone Save This function is used to save the keystone adjustment values. Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then reconnected. 1. Select item name "Keystone" and press the cursor (ᮣ) but- Aspect Auto ton. The sub menu will open. Filter 3 Projection 2. Select "Keystone Save" with the cursor (LM) buttons and KeystVonKeeystone 0- + set with the cursor (ᮤ ᮣ) buttons (or with the main unit ( ) H Keystone 0- + button). Keystone Save Off Off The keystone adjustment values return to the initial values when the power cable is unplugged. On The keystone adjustment values are retained in storage even when the power cable has been unplugged. Note Regardless of whether Keystone Save is set to "On" or "Off", when projection is from the standby condition, the picture is projected using the previous keystone adjustment values. Picture in Picture This function displays the picture from the VIDEO jack as a sub-picture on the input screen (i.e., the main picture) from the PC connector. 1. Select item name "Picture in Picture" and press the cursor (ᮣ) button. The sub menu will open. 2. Select "Size" or "Position" with the cursor (LM) buttons and set with the cursor (ᮤ ᮣ) buttons (or with the main unit ( ) button). Size Settings On Off Sub-picture Main-picture Aspect Filter Projection Keystone Picture in Picture Aspect Filter Projection Keystone Picture in PicStuizre Position Auto 3 Auto 3 Off Position Settings Display at upper left of main screen Display at upper right of main screen Display at center of main screen Display at lower left of main screen Display at lower right of main screen Note • Sizes of a sub-picture vary depending on the signal input to the PC connector. • The adjustment display and picture will not appear unless a signal is input to the PC connector. E-54