Olympus VP-1 VP-1 User's Manual (English) - Page 50

Color White When projecting, this function is used to emphasize the whites of text or diagrams on the personal computer. Select item name "White" and select the setting contents with the cursor (ᮤ ᮣ) buttons. Select the desired degree of white from among "Low", "Medium", and "High". Quick Color Adj. Gamma Color Temp. White Custom Normal Normal High Color System This function sets the color system of the video signal. Normally, this should be set to Auto. Set this function when the system cannot be identified with Auto. Select item name "Color System" and select the setting contents with the cursor (ᮤ ᮣ) buttons. Auto Automatic identification NTSC .......... Fixes the setting to NTSC PAL Fixes the setting to PAL SECAM ....... Fixes the setting to SECAM Quick Color Adj. Gamma Color Temp. White Color System Standard Normal Normal High Auto Color Space Set this function when a component signal (YCbCr or YPbPr) is projected and the image is extremely red or extremely green. Select the item name "Color Space" and use the cursor (ᮤ ᮣ) buttons to select a color space setting that provides a normal image. Selection contents at the time of YCbCr input YCbCr601, YCbCr709, YCbCrSMPT Selection contents at the time of YPbPr input YPbPr601, YPbPr709, YPbPrSMPT Quick Color Adj. Gamma Color Temp. White Color System Color Space Quick Color Adj. Gamma Color Temp. White Color Space Standard Normal Normal High Auto YCbCr601 Standard Normal Normal High YPbPr601 Note * When the component signal undergoes conversion processing to red, green, and blue which express the image of the projector, the correct color cannot be reproduced unless a system compliant with the color difference conversion system of the input signal is used. Color Space serves to make this selection. E-50