Olympus VP-1 VP-1 User's Manual (English) - Page 51

View G Perform this operation while projecting the picture for which the adjustment/setting will be made. G Select the menu name "View". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45. Aspect This function sets the horizontal and vertical picture proportions of the input signal. Select the item name "ASPECT" and select the setting contents with the cursor (ᮤ ᮣ) buttons. Aspect Filter Projection Keystone Picture in Picture Personal Computer Signal Auto Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3 Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable size Real Projects the input signal without pixel conversion Input Signal Auto Direct Auto 3 Real The setting is higher than the display resolution of the projector. The setting is lower than the display resolution of the projector. Video Signals Auto While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound- aries of the screen. The top and bottom of the 16:9 image becomes black. Wide Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed image in a proper aspect ratio.) Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.) Aspect ratio selection Auto Wide Zoom 4:3 screen 16:9 screen E-51