Onkyo CS-N575D User Manual English - Page 14

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Initial Setup Would you like to start Wi-Fi setup? Yes No To make Wi-Fi settings, select "Yes". Select the method for setting in the next screen (for example "Scan Networks"). Asb Wi-Fi Setup Scan Networks Input SSID ∫ Scan Networks From the list of SSID for access points such as wireless LAN routers, select the required SSID and make the settings. 1. Select the SSID of the access point you want to connect and then confirm. Asb Wi-Fi Setup aaaaaaaaaaaaaaa bbbbbbbbbbbbbbb cccccccccccccccc ddddddddddddddd 2. Select either "Enter Password" or "Push Button" and confirm. If the access point has an automatic setting 14 button, by selecting "Push Button" you can connect without entering a password. Asb Wi-Fi Setup Enter Password Push Button 3. If you select "Enter Password", enter the password of the access point. For details on how to enter text, refer to "Entering text" (ÄP36). Password A/a OK MEMORY Hide/Show If you select "Push Button", then after pressing and holding the automatic setting button on the access point for the required amount of time, press ENTER on the remote controller. 4. is displayed when the settings are complete. ∫ Enter SSID of the access point Set by entering the SSID of the access point you want to connect. 1. Enter the SSID. For details on how to enter text, refer to "Entering text" (ÄP36). SSID A/a OK 2. Select and confirm the authentication method. Asb Security Method None WEP WPA WPA2 0 If you select "None", proceed to step 3. If you select "WEP", "WPA", or "WPA2", enter the password and confirm. 3. is displayed when the settings are complete.