Onkyo CS-N575D User Manual English - Page 39

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others This can be set only when "Wi-Fi" is selected in "Connection Type". ∫ DHCP "On" (Default Value): Auto configuration by DHCP "Off": Manual configuration without DHCP If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually. ∫ IP Address Displays/Sets the IP address. ∫ Subnet Mask Displays/Sets the subnet mask. ∫ Gateway Displays/Sets the gateway. ∫ DNS Server Displays/Sets the primary DNS server. ∫ Proxy URL Displays/Sets the proxy server URL. ∫ Proxy Port Displays/Sets the proxy server port number when you enter "Proxy URL". ∫ Friendly Name Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. You can input up to 31 characters. For details on how to enter text, refer to "Entering text" (ÄP36) ∫ Network Check You can check the network connection. Option ∫ Power Management Auto Standby Network Standby Bluetooth Wakeup / Clock Call This setting places the unit on standby automatically after 20 minutes of inactivity without any audio input. "On": The unit will automatically enter standby mode. "Off": The unit will not automatically enter standby mode. 0 Default values vary depending on the regions. When this feature is turned "On", you can turn on the power of the unit via the network using an application that can control this unit. 0 If "On" (default setting) is selected, power consumption during standby becomes larger than normal. 0 When the connection to the network is lost, "Network Standby" may be disabled to reduce power consumption. This function wakes up the unit on standby by connecting a BLUETOOTH wireless technology enabled device. Also, if DISPLAY on the main unit or on the remote controller is pressed while this unit is on standby, the current time is displayed. "On": When this function is to be used "Off" (Default Value): When this function is not to be used 0 Setting to "On" increases the power consumption even when the unit is on standby. 0 This setting is fixed to "Off" if "Bluetooth" - "Auto Input Change" is set to "Off". ∫ Language Select the language displayed on the display. (CS-N575D) English (Default Value), German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese (CS-N575) English (Default Value), French En 39