Onkyo CS-N575D User Manual English - Page 41

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Pairing Information You can initialize the pairing information saved on this unit. Press 3/4 to select "Clear", then press ENTER to initialize the pairing information stored in this unit. 0 This function does not initialize the pairing information on the BLUETOOTH wireless technology enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH wireless technology enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH wireless technology enabled device's instruction manual. Timer Set the time (ÄP15) and make settings for the alarm. (ÄP34) System Infomation The MAC address of this unit and the current firmware version will be displayed. Factory Reset Reset the settings of this unit to the status at the time of shipment. We recommend that you take a note of the settings you have changed before going ahead with a factory reset. Select "Yes" and confirm to go ahead. The unit will be placed on standby automatically when initializing is completed. Update You will not be able to select "Update" if there is no firmware update. ∫ via Network Press ENTER to select when you want to update the firmware via network. ∫ via USB Press ENTER to select when you want to update the firmware via USB. En 41