Onkyo CS-N575D User Manual English - Page 43
Updating via USB
View all Onkyo CS-N575D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others to the latest version. If an error message is displayed: When an error occurs, "¢-¢¢ Error!" is displayed on the display of this unit. ("¢" represents an alphanumeric character.) Check the following: 0 ¢-01, ¢-10: Ethernet cable not found. Connect the Ethernet cable properly. 0 ¢-02, ¢-03, ¢-04, ¢-05, ¢-06, ¢-11, ¢-13, ¢-14, ¢-16, ¢-17, ¢-18, ¢-20, ¢-21: Internet connection error. Check the following: - The router is turned on - This unit and the router are connected via the network Try to disconnect and then connect again the power to the unit and router. This may solve the problem. If you are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down. Check the service status with your ISP provider. 0 Others: Disconnect then reconnect the power cord, then repeat from the beginning. Updating via USB 0 Prepare a 128 MB or larger USB storage device (FAT16 or FAT32 file system format). 0 Delete any data stored on the USB storage device. 0 Turn off the controller component (PC etc.) connected to the network. 0 Stop any playing Internet radio, USB storage device, or server content. 0 Some USB storage devices may take long to load, may not be loaded correctly, or may not be correctly fed depending on the device or their content. 0 We will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device with this unit. Thank you for your understanding. 1. Connect the USB storage device to your PC. 2. Download the firmware file from our company's website to your PC and unzip. Firmware files are named in the following way: ONKCRN zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. 0 Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port of this unit. 0 If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. 0 If the USB storage device has been partitioned, each section will be treated as an independent device. 5. The menu is displayed on the display when button on the remote controller is pressed. Asb Menu Network Option Timer System Information 6. Press 3/4 and ENTER to select "Update" - "via USB" in order. Asb Update via Network via USB 0 You will not be able to select "Update" if there is no firmware update. 7. Press ENTER to start the firmware update. 0 "Update Complete" is displayed when the update is complete. 8. Press Í ON/STANDBY on the main unit to switch the power of the unit off. If you do nothing, then the power will turn off automatically after 3 minutes. The process is completed and your firmware is updated to the latest version. 9. Remove the USB storage device from this unit. If an error message is displayed: When an error occurs, "¢-¢¢ Error!" is displayed on the display of this unit. Check the following: 0 ¢-01, ¢-10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit. Connect the USB storage device to an external power source if it has its own power supply. 0 ¢-05, ¢-13, ¢-20, ¢-21: The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file. 0 Others: Disconnect then reconnect the power cord, then repeat from the beginning. En 43