Onkyo CS-V645 DR-645 Owner Manual - Page 25

Settings, Introduction, GENERAL SETUP

Page 25 highlights

Settings Settings Introduction This chapter describes how to use the SETUP menu. Most settings and adjustments are required to be set when you first use the system. 1 Turn on the unit and the connected television or monitor. • The SETUP menu is available only in the "DVD Source" mode or the "USB Source" mode. If another source is selected, press INPUT on the unit to select the "DVD Source" or the "USB Source". • You can also use the remote control's DVD or iPod/USB to select source. 2 Press SETUP. The SETUP menu appears on the screen. • To exit the SETUP menu, press SETUP again. • Although it is possible to enter the SETUP menu during playback (or resume mode), not all menu functions will be available. To expand the number of available functions, press  twice. 3 Use R/X/F/S to navigate the menus. If no cursor is visible on the screen, use F/S to select a page. • Use R/X to highlight menu items within the selected page. • Press F to return to the upper menu. 4 Press S to enter the menu item. 5 Use R/X to select the options within the menu item, and press ENTER to confirm the entry. Individual menu functions are described. Repeat steps 3 through 5 as required. 6 Press SETUP to exit the SETUP menu. GENERAL SETUP TV DISPLAY The shape of the television or monitor may not match the shape of the movie frame. To avoid distortion on older televisions, you may need to change the way in which the image is displayed. Televisions use a 4:3 aspect ratio; high-definition televisions use 16:9 aspect ratio (as do movies). Note • You may need to read your television's manual in conjunction with this section in order to achieve the best results. Some discs do not allow the aspect ratio to be changed and you will therefore have to change the aspect ratio on the TV. `4:3 PANSCAN: This mode is used with 4:3 televisions. 4:3 images are displayed normally. When showing 16:9 programmes, the full height of the screen is displayed, and the left and right part of the image are cut off. 4:3 picture 16:9 picture `4:3 LETTERBOX: This mode is used with 4:3 televisions. 4:3 images are displayed normally. 16:9 images are visible at their full width, but there are blank area at the top and bottom of the screen. 4:3 picture 16:9 picture ` 16:9: Use with a 16:9 wide television. 4:3 picture 16:9 picture • Some wide-screen discs that do not permit the Pan Scan mode playback are automatically played in Letter Box mode. • Depending on the DVD, "4:3 LETTERBOX" may be selected automatically instead of "4:3 PANSCAN" and vice versa. • If "16:9" is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin). Make this setting while playback is stopped; you cannot do this while playing back a disc. En 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

25
En
Settings
Settings
This chapter describes how to use the SETUP menu.
Most settings and adjustments are required to be set when
you first use the system.
TV DISPLAY
The shape of the television or monitor may not match the
shape of the movie frame. To avoid distortion on older
televisions, you may need to change the way in which the
image is displayed. Televisions use a 4:3 aspect ratio;
high-definition televisions use 16:9 aspect ratio (as do
movies).
Note
You may need to read your television’s manual in conjunction
with this section in order to achieve the best results. Some discs
do not allow the aspect ratio to be changed and you will therefore
have to change the aspect ratio on the TV.
4:3 PANSCAN
:
This mode is used with 4:3 televisions. 4:3 images
are displayed normally. When showing 16:9
programmes, the full height of the screen is
displayed, and the left and right part of the image are
cut off.
4:3 LETTERBOX
:
This mode is used with 4:3 televisions. 4:3 images
are displayed normally. 16:9 images are visible at
their full width, but there are blank area at the top
and bottom of the screen.
16:9
:
Use with a 16:9 wide television.
• Some wide-screen discs that do not permit the Pan Scan
mode playback are automatically played in Letter Box
mode.
• Depending on the DVD, “
4:3 LETTERBOX
” may be
selected automatically instead of “
4:3 PANSCAN
” and
vice versa.
• If “
16:9
” is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects
look thin).
Introduction
1
Turn on the unit and the connected television or
monitor.
• The SETUP menu is available only in the “
DVD
Source
” mode or the “
USB Source
” mode. If
another source is selected, press
INPUT
on the unit
to select the “
DVD Source
” or the “
USB Source
”.
• You can also use the remote control’s
DVD
or
iPod
/
USB
to select source.
2
Press
SETUP
.
The SETUP menu appears on the screen.
• To exit the SETUP menu, press
SETUP
again.
• Although it is possible to enter the SETUP menu
during playback (or resume mode), not all menu
functions will be available. To expand the number
of available functions, press
2
twice.
3
Use
q
/
w
/
e
/
r
to navigate the menus.
If no cursor is visible on the screen, use
e
/
r
to
select a page.
• Use
q
/
w
to highlight menu items within the
selected page.
• Press
e
to return to the upper menu.
4
Press
r
to enter the menu item.
5
Use
q
/
w
to select the options within the menu
item, and press
ENTER
to confirm the entry.
Individual menu functions are described.
Repeat steps 3 through 5 as required.
6
Press
SETUP
to exit the SETUP menu.
GENERAL SETUP
Make this setting while playback is stopped; you
cannot do this while playing back a disc.
4:3 picture
16:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture