Onkyo CS-V645 DR-645 Owner Manual - Page 32
Unable to select Progressive Scan, No Sound or Video
View all Onkyo CS-V645 DR-645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
■ Disc does not play Insert a readable disc and ensure that the label side faces up. Check the disc type, color system and regional code. Check for any scratches or smudges on the disc. Press MENU to exit the system setup menu. Disable the password for parental control or change the rating level. If condensation is suspected, unplug the AC power cord and leave DR-645 for two to three hours in the room temperature before playing any discs. ■ Poor radio reception Increase the distance between the unit and your TV or VCR. Fully extend the FM antenna. Connect an outdoor FM antenna instead. ■ Unable to select Progressive Scan Make the component video connection. ■ Audio or subtitle languages cannot be set The disc is not recorded with sound or subtitles in multiple languages. The audio or subtitle language setting is prohibited on the disc. ■ Cannot display some files in USB flash drive The number of folders or files in the USB flash drive has exceeded a certain limit. This phenomenon is not a malfunction. The formats of these files are not supported. ■ USB flash drive not supported The USB flash drive is incompatible with the unit. Try another one. ■ Timer does not work Set the clock correctly. Switch on the timer. ■ Clock/timer setting erased Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. iPod ■ No Sound or Video Make sure your iPod is connected properly. If there's no video, make sure your iPod supports TV out. Make sure your iPod is playing. On your TV, make sure that the video input to which the unit is connected is selected. Make sure all plugs are pushed in all the way. Try resetting your iPod. Video on the iPod LCD screen is not output to the monitor. Only the video content is output. The iPod video signal is not output via HDMI. ■ Remote Control does not work Make sure your iPod is seated properly on the dock connector. If your iPod is in a case, it may not connect properly, so always remove the case before inserting your iPod into the DR-645. Your iPod cannot be controlled while it's displaying the Apple logo. If you're using the remote control, be sure to point it toward DR-645 when you want to control your iPod. Try resetting your iPod. Changing setting will not take effect if done while pausing or video playback. ■ Others Depending on the backlight setting on your iPod, the display may become dim during use. If the display is hard to see, change the backlight setting on your iPod. Connecting the iPod to the dock automatically turns on the TV output. If the iPod does not function normally even when inserted in the dock connector, check that the iPod is firmly inserted. If the iPod still does not function after checking, remove the iPod from the dock, wait a few seconds, and insert it again. En 32