Onkyo HT-R393 Owners Manual -English - Page 10

Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games. STEREO: You can select a listening mode for stereo and all channel stereo sources. r For details on the listening modes, see the Advanced Manual. "Direct" for playing the input signals as-is Selecting this mode allows the input signals to be played as they are. For example, 2 ch signals of music CD will be played in stereo, 5.1 ch signals in 5.1 ch, and Dolby Digital signals of blu-ray disc or DVD in the Dolby Digital sound field according to the specified number of channels. Other useful functions „ Playing Video and Audio from Different Sources: It is possible to play audio and video from different sources. For example, you can play audio from the CD player and video from the BD/DVD player. In this case, press BD/DVD and then TV/CD. Then start playback on the BD/DVD player and CD player. This function is effective when an input with audio only has been selected (TV/CD, AM or FM in the initial setting). „ Adjusting Sound Quality: It is possible to enhance or moderate the bass and treble of front speakers. Press TONE on the main unit several times to select the desired setting from "Bass", "Treble", and "PM Bass" (Phase Matching Bass), and adjust with +/-. "Bass": Allows you to enhance or moderate the bass. "Treble": Allows you to enhance or moderate the treble. "PM Bass": Allows you to keep the clear midrange and effectively enhance the bass. „ Muting Temporarily: Press MUTING on the remote controller. Press MUTING again to cancel muting. „ Changing the Display Brightness: Press DIMMER on the remote controller several times to select the desired brightness. „ Changing the Input Display: Press DISPLAY on the remote controller several times to switch the display of the main unit in order of: Input source & volume Listening mode Signal format Sampling frequency r If "Dolby D 5.1" is displayed in signal format, the Dolby Digital 5.1 ch signals are being input. When listening to AM/FM radio, the band, frequency and preset number are displayed. Step 3: Playing Back 2 Listening to AM/FM Radio Auto tuning method is explained in Basic Manual. For more details on AM/FM radio station, see Advanced Manual. 1. Press AM or FM on the unit to select either "AM" or "FM". 2. Press TUNING MODE on the unit so that the "AUTO" indicator on the unit's display lights. 3. Press TUNING on the unit. The automatic search for a radio station starts. Searching stops when one is found. When tuned into a radio station, the " TUNED " indicator on the unit's display lights. The "FM STEREO" indicator lights if the radio station is an FM radio station. TUNED AUTO FM STEREO (Actual display depends on the country.) Registering a Radio Station: It allows you to register up to 40 of your favorite AM/FM radio stations. 1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY on the unit so that the preset number on the display flashes. 3. Repeatedly press PRESET on the unit to select a number between 1 and 40 while the preset number is flashing (about 8 seconds). 4. Press MEMORY on the unit again. When registered, the preset number stops flashing. Repeat this procedure for all of your favorite AM/FM radio stations. Press PRESET or CH +/- to select the registered radio station. 10