Onkyo HT-R393 Owners Manual -English - Page 17
Specifications
![]() |
View all Onkyo HT-R393 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Specifications Amplifier Section Rated Output Power All channels: 65 watts minimum continuous power per channel, |QJONQCFUEJCPPGNUFTKXGPHTQO*\VQM*\YKVJC maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, |EJCPPGNUFTKXGPCVM*\YKVJCOCZKOWOVQVCNJCTOQPKE distortion of 0.7% (FTC) 110 watts minimum continuous power per channel, 6 ohm loads, |EJCPPGNFTKXGPCVM*\YKVJCOCZKOWOVQVCNJCTOQPKEFKUVQTVKQP of 1 % (North American) 6 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others) Maximum Effective Output Power 6 ch × 120 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian) Dynamic Power (¼) ¼IEC60268-Short-term maximum output power 9 ŝ(TQPV 9 ŝ(TQPV 9 ŝ(TQPV THD+N (Total Harmonic Distortion+Noise) 0.7% (20 Hz - 20 kHz, half power) Damping Factor (TQPVM*\ŝ Input Sensitivity and Impedance (Unbalance) O8Mŝ .+0' Rated RCA Output Level and Impedance O8Mŝ .+0'176 Maximum RCA Output Level and Impedance 8Mŝ .+0'176 Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode) Tone Control Characteristics ±10 dB, 20 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 100 dB (LINE, IHF-A) Speaker Impedance Video Section Input Sensitivity/Output Level and Impedance 8RRŝ %QORQPGPV; 8RRŝ %QORQPGPV2B/CB, PR/CR) 8RRŝ %QORQUKVG Component Video Frequency Response 5 Hz - 100 MHz/+0 dB, -3 dB Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range 522/530 kHz - 1611/1710 kHz Preset Channel 40 Bluetooth Section Communication system Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate) Maximum communication range Line of sight approx. 15 m (¼) Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs SBC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) ¼The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. General Power Supply AC 120 V, 60 Hz (North American) AC 230 V, 50 Hz (European, Australian and British) AC 220 - 240 V, 50/60 Hz (Others) Power Consumption 3.8 A (North American) 380 W (European, Australian and British) 410 W (Others) 0.2 W (Stand-by, North American) 0.3 W (Stand-by, Others) 55 W (No-sound) Dimensions (W × H × D) 435 mm × 150 mm × 321 mm 17-1/8" × 5-7/8" × 12-5/8" Weight 7.6 kg (16.8 lbs.) (North American) 8.1 kg (17.9 lbs.) (Others) HDMI Input IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR), IN4 (GAME), IN5 (PC), IN6 Output OUT Video Resolution Pass Through : 4K 60 Hz (YCbCr 4:2:0) Audio Format DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM Supported 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD) Video Inputs Component IN (GAME) Composite IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX Video Outputs Component OUT Composite MONITOR OUT Audio Inputs Digital OPTICAL (TV/CD) COAXIAL 1 (BD/DVD), 2 (CBL/SAT) Analog BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, AUX Audio Outputs Analog ZONE2 LINE OUT Speaker Outputs FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER Phones PHONES (Front, ø 6.3) Others RI 1 USB 1 Specifications and features are subject to change without notice. 17
![](/manual_guide/products/onkyo-htr393-owners-manual-english-e914e45/17.png)