Onkyo HT-R393 Owners Manual -English - Page 13
Using the multi-zone function, Connecting with Player, Making multi-zone connection, Performing
View all Onkyo HT-R393 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
6 Using the multi-zone function You can listen to the sound in a separate room by making the Zone connection (analog) between the unit and an integrated amplifier placed in the separate room. You can use a Blu-ray Disc player in the main room in which the unit is placed, while receiving AM/FM broadcast in the separate room. Audio can be played in the main room and the separate room simultaneously, or only in the separate room. r The sources you can enjoy in the separate room are the players connected to the analog audio input jacks of the unit, and AM/FM broadcast. r When listening to AM/FM broadcasting, you cannot select different stations for the main room and separate room. Therefore broadcasting of the same station will be heard in the both rooms. Connecting with Player To use a Blu-ray Disc player or other players as the source of Zone audio output, it is necessary to connect the RCA audio output jacks of the player and the analog audio input jacks of the unit using the analog audio (RCA) cable. AUDIO OUT Making multi-zone connection Connect the ZONE 2 LINE OUT jacks of the unit and the line-in jacks of the pre-main amplifier in a separate room with an analog audio (RCA) cable. Step 3: Playing Back Performing multi-zone playback 1. Press ZONE2 on the remote controller, point the remote controller at the remote controller sensor and press zRECEIVER. "Z2" lights on the unit and the ZONE function is enabled. (ZONE 2 is now on.) 2. Press ZONE2 on the remote controller again and press INPUT SELECTOR of the input to be played in a separate room. To play the same source in the main room and separate room, hold down ZONE2 for approximately 3 seconds. The volume should be adjusted with the pre-main amplifier used in the separate room. To control on the main unit: Press ZONE2 and within |UGEQPFURTGUUVJGKPRWVUGNGEVQTDWVVQPQHVJGKPRWVVQDG played in a separate room. To play the same source in the main room and separate room, press ZONE2 twice. To turn off the multi-zone function: Press ZONE2 on the remote controller and press zRECEIVER. Alternatively press OFF on the main unit. r Multi-zone playback cannot be performed if a player is connected to HDMI jack using HDMI cable or OPTICAL/ COAXIAL jack using digital cable. Connect the players using analog audio cable for multi-zone playback. Analog audio output setting may be necessary on the player. r If ZONE 2 is on, power consumption during standby becomes larger than normal. r While ZONE 2 is on, the RI linked system function (interlink between Onkyo components) is disabled. r Zone audio output is not possible if the player and the unit are connected only via HDMI cable or digital cable. r Some players require analog audio output setting. 13