Onkyo HT-R393 Owners Manual -English - Page 7
Setting Up - remote
View all Onkyo HT-R393 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Step 2: Setting Up 1 Turning the power on Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode. Changing speaker configuration 1. After pressing RCV, press HOME on the remote controller. 2. With the cursor, select "Setup", and press ENTER. 3. Select "5. Sp Config" with the cursor, and press ENTER. r When the unit is turned on, a large instantaneous current may flow affecting functionality of the computer and other devices. It is recommended to use a separate outlet from that for the computer or such other sensitive devices. z Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN. To return to the Home menu, press HOME. 2 Making speaker setting The speaker configuration of this unit is set to 5.1 ch by default. To use the unit in a different environments such as a configuration without center speaker, surround speaker or subwoofer, you need to make settings for each of the following items. r If the settings do not match the actual speaker configuration, audio playback may not be performed correctly. Check your speaker configuration and make correct settings. Move the cursor with d/c buttons and set "None" for the speaker ("No" for subwoofer) which is not connected. Press HOME to save the changed setting and close the menu screen. r This setting cannot be changed if headphones are connected or audio is output from the speakers of the TV. Setting speaker distance 1. After pressing RCV, press HOME on the remote controller. 2. Select "Setup" with the cursor, and press ENTER. 3. Select "6. Sp Distance" with the cursor, and press ENTER. 7