Onkyo HT-RC470 Owner Manual - Page 82
En-82, Component, Video Out, Monitor Out V, Video
View all Onkyo HT-RC470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Important Note Regarding Video Playback The AV receiver can upconvert component video and composite video sources for display on a TV connected to the HDMI output(s). However, if the picture quality of the source is poor, upconversion may make the picture worse or disappear altogether. In this case, try the following: 1 If the video source is connected to a component video input, connect your TV to COMPONENT VIDEO OUT. If the video source is connected to a composite video input, connect your TV to MONITOR OUT V. 2 On the main menu, select "Input/Output Assign", and then select "Component Video Input" (➔ page 51). If the video source is connected to COMPONENT VIDEO IN, select the relevant input selector, and assign it to "IN1". If the video source is connected to a composite video input, select the relevant input selector, and assign it to Tip • To by-pass the upconversion, set the "Picture Mode" setting to "Direct" (➔ page 59). En-82 Appendix