Onkyo S9100THX Owner Manual - Page 79
Audyssey Dynamic EQ, Music Optimizer, Speaker Levels, A/V Sync, DynamicEQ, M.Optimizer
UPC - 751398008283
View all Onkyo S9100THX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Adjusting the Listening Modes-Continued Audyssey Dynamic EQ® ■ DynamicEQ With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level-not just at reference level. Off: Audyssey Dynamic EQ off. On: Audyssey Dynamic EQ on (default). Note: • Audyssey Dynamic EQ can be set only when the Equalizer Settings on page 84 are set to Audyssey. Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby. ■ Subwfr (Subwoofer) You can adjust the level from -15 dB to +12 dB. ■ Center You can adjust the level from -12 dB to +12 dB. Notes: • You cannot use this function while the AV receiver is muted. • Speakers that are set to No or None in the Speaker Configuration cannot be adjusted (see page 81). • This setting is not available when the Direct listening mode is used with an analog input signal. Music Optimizer ■ M.Optimizer The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use "lossy" compression, such as MP3. Off: Music Optimizer off (default). On: Music Optimizer on. Note: • The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48 kHz, and analog audio input signals. The Music Optimizer is disabled when the Direct listening mode is selected. A/V Sync ■ A/V Sync When using progressive scanning on your DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signal. You can set it from 0 to 100 milliseconds (ms) in 20 millisecond steps. 79