Onkyo T-4030 User Manual English - Page 13

Connecting Your Components-Continued Connecting Onkyo R Components If you connect the T-4030 to another Onkyo R-capable component with the supplied R cable and audio cable, you can use the following system functions. R cables are special cables solely for use with Onkyo products. Auto Power On When you turn on the T-4030, your Onkyo amplifier will turn on automatically. (The amplifier's POWER switch must be set to ON for this to work.) Direct Change When you select a radio preset or change the band (FM, DAB), your Onkyo amplifier will automatically select the T-4030 as the input source. Remote Control Operation You can control the T-4030 by using your Onkyo amplifier's remote controller. See the amplifier's instruction manual for details. With R (Remote Interactive), you can control your R-capable Onkyo CD player, T-4030, and so on with your amp's remote controller. Onkyo amplifier Connecting the Power Cord Connect the power cord to a suitable wall outlet. Note: • Before connecting the power cord, connect all of other components. Turning On and Standby k ON/STANDBY 1 Press the [kON/STANDBY] button. Alternatively, press the remote controller's [k ] button. The tuner comes on, and the display lights up. To turn the tuner off, press the [k ON/STANDBY] button, or press the remote controller's [k ] button. The tuner will enter Standby mode. Onkyo CD player R jack T-4030 R jack Notes: • Push each plug in all the way to make a good connection. • Use only dedicated R cables for R connections. R cables are supplied with Onkyo tuners and players (DVD, CD, etc.). • Some components, including the T-4030, have two R jacks. They're both the same, so use either one. • R jacks should be connected only to Onkyo components. • Connecting them to another manufacturer's component may cause a malfunction. • Some components may not support all R functions. See the manuals supplied with your other Onkyo components for more information. En-13