Onkyo T-4030 User Manual English - Page 19

Listening to the Radio-Continued 2. Program Type Displays the type of program. 3. Bit Rate and Audio Mode Displays the station's bit rate and audio mode (stereo, mono, or joint stereo). 4. Signal Quality Displays the signal quality. 0-59: Poor reception 60-79: Good reception 80-100: Excellent reception 5. Multiplex Name Displays the name of the current multiplex. ■ DAB Scan This setting determines which DAB bands are scanned by the Auto Tuning function (see page 18). U.K: Band III (11B-12D). W.W (default):Band III (5A-13F). ■ DRC Setting With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume levels-ideal for listening to the radio late at night when you don't want to disturb anyone. Use the arrow [A]/[S] buttons to select the following options, and then press [ENTER]. Off (default): DRC off. High: Large reduction in dynamic range. Low: Small reduction in dynamic range. Notes: • Press [RETURN] to return to the previous menu. DAB Tuning Mode 6. Multiplex Number and Frequency Displays the number and frequency of the current multiplex. DAB Setup & , ( , # , 5 , ENTER SETUP RETURN TUNING MODE 1 Press the [TUNING MODE] button. 2 The items toggle in the order of "Alphabet" ¼ "Multiplex" ¼ "Active St" each time the [TUNING MODE] button is pressed. With this setting, you can sort the available stations alphabetically, by multiplex, or active stations. Alphabet (default): Sort stations alphabetically. Multiplex: Sort stations by multiplex. Active St: Sort by active stations. Receivable stations appear at the top of the list. stations that cannot be received properly appear at the bottom of the list. Use the following functions and settings to set up DAB digital radio. 1 Press the [SETUP] button. 2 Use the arrow [D]/[F] button to select the item you want to set. The items are explained below. En-19