Onkyo T-4030 User Manual English - Page 14

Listening to the Radio Listening to FM Stations With the built-in tuner, you can enjoy FM radio stations. BAND TUNING MODE TUNING BAND MODE / Manual Tuning To activate this mode, press the [TUNING MODE] button to turn off the "AUTO" indicator. In this mode, you will receive the broadcast in monaural sound. 3 Press the TUNING [a] or [s] button. You can also use the remote controller's arrow [D]/[F] buttons to tune the radio. Auto Tuning Searching stops when a station is found. Manual Tuning The frequency stops changing when you release the button. Press the buttons repeatedly to change the frequency one step at a time. The frequency changes in 0.05 MHz steps for FM. When tuned to a station, the Tuned indicator appears. When tuned to a stereo FM station, the FM ST indicator also appears. FM ST 1 Use the tuner's [BAND] button, or the remote controller's [BAND] button to select FM. Tuning to Weak FM Stereo Stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono. Band Frequency (Actual display depends on the country.) 2 Press the [TUNING MODE] button or the remote controller's [MODE] button so that the AUTO indicator appears or disappears from the display. AUTO indicator Auto Tuning To activate this mode, press the [TUNING MODE] button to turn on the "AUTO" indicator. In this mode, you will receive the broadcast in stereo sound. En-14