Onkyo TA-RW255 Owner Manual - Page 7
Reverse mode function - cassette deck ta
UPC - 751398006609
View all Onkyo TA-RW255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
TA-RW255_En.book Page 7 Tuesday, April 19, 2005 4:36 PM A A A A To play a tape Recheck the tape direction settings (shown by the Deck A and Deck B direction indicators) before pressing the d or f button. The following explanation assumes that the tape direction is forward ( s ). Fast forward and rewind To fast forward the tape, press the f button. To rewind the tape, press the d button. • To stop either fast forward or rewind, press the e button. Automatic tape selection system This deck automatically detects the type of cassette in the cassette holder and sets the bias and equalization to the correct settings. Tape selection is performed by detecting the presence or absence of identification pits on the back of the cassette shell. Cassettes manufactured before this identification system was adopted and bargain cassettes that do not incorporate these pits cannot be used with this deck. Reverse mode function • Recheck the tape travel direction settings (shown by the Deck A and Deck B direction indicators) before beginning playback or recording. • The following explanation assumes that cassette side A is facing outward. • There is a silent gap about 10 seconds long when the direction of tape travel switches from forward to reverse or from reverse to forward when the end of a tape side is reached. Continuous tape playback A A Insert the cassettes you wish to play in Deck A and Deck B. Set the reverse mode to b . Press the a or s button of either Deck A or Deck B. Both sides of both cassettes will play back, one after the other, and then the process will repeat. After four complete playback A A cycles, playback stops automatically. • Be sure to select the same Dolby NR system on both Deck A and Deck B. A A A A Recording to both sides of a tape (Deck B) Insert the cassette you wish to record in Deck B. Set the reverse mode to b . Press the t button followed by the s button of Deck B to start recording from the front side. Both sides of the cassette are recorded. Then, the auto-stop mechanism will stop the tape at the end of the reverse side. • If recording starts in the reverse direction first, only the reverse side is recorded, after which tape travel stops automatically. 7