Onkyo TX-8222 Owner Manual - Page 17

Connecting a Recording Component, Connecting a Remote Interactive, Dock RI Dock, Connecting a DVD

Page 17 highlights

Connecting Your Components-Continued Connecting a Recording Component To connect recording components, such as cassette deck, MD recorder and CD recorder, use an analog audio cable to connect the receiver's TAPE 1 or 2 IN L/R jacks to the cassette deck's analog audio output jacks, and use another analog audio cable to connect the receiver's TAPE 1 or 2 OUT L/R jacks to the cassette deck's analog audio input jacks, as shown. When you want to monitor the recorded sound, use the TAPE 2 jacks for connecting a recorder. / REC PLAY (IN) (OUT) Connecting a Remote Interactive Dock (RI Dock) Use an analog audio cable to connect the TX-8522's TAPE 1 IN L/R or VIDEO IN L/R jacks, or to connect the TX-8222's LINE 2 IN L/R or TAPE 1 IN L/R jacks, to the RI Dock's analog audio output jacks. Then use an cable to connect the receiver's jack to the RI Dock's jack, as shown. When you change the input display name to "HDD," you can operate the RI Dock using the remote controller supplied with the receiver (see page 20). Connecting a DVD Player For the TX-8522, use an analog audio cable to connect the TX-8522's DVD IN L/R jacks to the analog audio output jacks on the DVD player, and use a video cable to connect the TX-8522's DVD IN V jack to the composite video output jack on the DVD player. Then, connect the TX-8522's MONITOR OUT jack to a composite video input jack on the TV. You can select the video and sound from the DVD player simultaneously by pressing the DVD input selector button. For the TX-8222, only audio input from the DVD player can be connected. The video input from the DVD player should be connected to the TV directly. Use an analog audio cable to connect the TX-8222's LINE 1/DVD IN L/R jacks to the analog audio output jacks on the DVD player. MONITOR OUT V DVD IN V IN L R DVD VIDEO IN L R AUDIO OUT VIDEO OUT TAPE 1 Remote Interactive Dock R ---- L AUDIO OUT Note: If you use the Onkyo Remote Interactive Dock (DS-A1), flip the RI MODE switch to "HDD" which is located on the underside. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

17
Connecting Your Components
—Continued
To connect recording components, such as cassette deck,
MD recorder and CD recorder, use an analog audio cable
to connect the receiver
s TAPE 1 or 2 IN L/R jacks to the
cassette deck
s analog audio output jacks, and use
another analog audio cable to connect the receiver
s
TAPE 1 or 2 OUT L/R jacks to the cassette deck
s analog
audio input jacks, as shown.
When you want to monitor the recorded sound, use the
TAPE 2 jacks for connecting a recorder.
Use an analog audio cable to connect the TX-8522
s
TAPE 1 IN L/R or VIDEO IN L/R jacks, or to connect
the TX-8222
s LINE 2 IN L/R or TAPE 1 IN L/R jacks,
to the RI Dock
s analog audio output jacks. Then use an
cable to connect the receiver
s
jack to the RI
Dock
s
jack, as shown.
When you change the input display name to
HDD,
you
can operate the RI Dock using the remote controller
supplied with the receiver (see page 20).
Note:
If you use the Onkyo Remote Interactive Dock (DS-A1),
ip the RI MODE switch to
HDD
which is located on
the underside.
For the TX-8522, use an analog audio cable to connect
the TX-8522
s DVD IN L/R jacks to the analog audio
output jacks on the DVD player, and use a video cable to
connect the TX-8522
s DVD IN V jack to the composite
video output jack on the DVD player.
Then, connect the TX-8522
s MONITOR OUT jack to a
composite video input jack on the TV.
You can select the video and sound from the DVD player
simultaneously by pressing the DVD input selector
button.
For the TX-8222, only audio input from the DVD player
can be connected. The video input from the DVD player
should be connected to the TV directly.
Use an analog audio cable to connect the TX-8222
s
LINE 1/DVD IN L/R jacks to the analog audio output
jacks on the DVD player.
Connecting a Recording Component
Connecting a Remote Interactive
Dock (RI Dock)
(IN)
REC
(OUT)
PLAY
R
AUDIO OUT
----
L
TAPE 1
Remote Interactive
Dock
Connecting a DVD Player
DVD
IN
MONITOR
OUT
AUDIO
OUT
VIDEO
OUT
L
R
DVD
IN
L
V
V
R
VIDEO
IN
TX-85228222_En.book 17 ページ 2006年5月4日
木曜日
午前11時51分