Onkyo TX-8222 Owner Manual - Page 20
Turning On the Receiver
View all Onkyo TX-8222 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Turning On the Receiver STANDBY/ON STANDBY indicator ON/STANDBY Turning On and Standby 1 Receiver STANDBY/ON or Remote controller Press the [STANDBY/ON] button. Alternatively, press the remote controller's [ON/STANDBY] button. The receiver comes on, the display lights up, and the STANDBY indicator goes off. To turn the receiver off, press the [STANDBY/ON] button, or press the remote controller's [ON/STANDBY] button. The receiver will enter Standby mode. To prevent any loud surprises when you next turn on the receiver, always turn down the volume before you turn it off. Changing the Input Display For the buttons listed below, you can change the input display name to "HDD." When the input display name has been changed to "HDD" for one of the buttons below, the display name for the other button cannot be changed to "HDD." TX-8522: TAPE 1, VIDEO TX-8222: TAPE 1, LINE 2 After you changed the input display name to "HDD," you can operate the RI Dock using the remote controller supplied with the receiver (see pages 10, 11). 1, 2 1, 2 1 TX-8522 or Press the appropriate input selector button. The selected input name appears in the display. TX-8222 or 2 Press and hold down the input selector button selected in the Step 1 above for approximately 3 seconds to change the display name to "HDD." 20