Onkyo TX-8222 Owner Manual - Page 8

Getting to Know the Receiver-Continued Rear Panel TX-8522 1 B 345 67 8 9 JK L M N TX-8222 1B 5 67 8 9 JK L OP A REMOTE CONTROL jacks These (Remote Interactive) jacks can be connected to the jacks on your other Onkyo audio components. The receiver's remote controller can then be used to control all of your components. To use , you must make an analog audio connection between the receiver and each component. B IR IN/OUT A commercially available IR receiver can be connected to the IR IN jack, allowing you to control the receiver while you're in Zone 2, or control it when it's out of sight, for example, installed in a cabinet. A commercially available IR emitter can be connected to the IR OUT jack to pass IR (infrared) remote control signals along to other components. 8 C Satellite antenna (on North American models) This jack is for connecting a satellite radio such as the XM Passport System, sold separately. D MONITOR OUT This jack is for connecting a TV with a composite video output. E AM ANTENNA These push terminals are for connecting an AM antenna. F FM ANTENNA This jack is for connecting an FM antenna. G SPEAKERS A These terminal posts are for connecting speaker set A.