Onkyo TX-NR5007 Owner Manual - Page 21
Connecting the Speaker Cables, 2-channel Playback with Speakers
UPC - 751398008849
View all Onkyo TX-NR5007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting the AV receiver-Continued Connecting the Speaker Cables 1 Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. 2 Unscrew the terminal. 1/2" to 5/8" (12 to 15 mm) 3 Fully insert the bare wires. 4 Screw the terminal tight. ■ 9.2-channel Playback with Speakers A The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one surround back speaker, connect it to the SURR BACK/ZONE 3 L terminal. Front high right speaker Front wide right speaker Front right speaker A Front left speaker A Front wide left speaker Front high left speaker Center speaker Surround right speaker Surround back right speaker Surround back left speaker Surround left speaker 21