Onkyo TX-NR696 Owners Manual - English - Page 125
Source, Volume, My Input Volume, Name Edit
View all Onkyo TX-NR696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Volume Change the Volume settings. Setting Item Volume Display Default Value Absolute Mute Level -∞dB Maximum Volume Off Power On Volume Last Headphone Level 0 dB Setting Details Switch the volume display between the absolute value and relative value. The absolute value 82 is equivalent to the relative value 0 dB. "Absolute": Absolute value such as "1" and "99" "Relative": Relative value such as "-81 dB" and "+18 dB" • If the absolute value is set to "82", "82 Ref" appears on the display. Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99". (When "Volume Display" is set to "Absolute") Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "1" to "99" and "Max". (When "Volume Display" is set to "Absolute") • You cannot set a higher value than that of "Maximum Volume". Adjust the output level of headphones. Select a value between "-12 dB" and "+12 dB". 4. Source 1. My Input Volume Set a volume value for each input selector. Setting Item Default Value My Input Volume Last Setting Details Select a value from "Last", "Min", "1" to "49" and "Max". (When "Volume Display" is set to "Absolute") • The volume level when the power is turned on is the value set for "Power On Volume". • To set the volume to the current volume, press the button of the input selector you wish to set for approx. 3 seconds. 2. Name Edit Set an easy name for each input. The set name appears on the main unit's display. Select the input selector to make the setting. Setting Item Name Edit Default Value Input name Setting Details 1. Select a character or symbol with the cursors, and press ENTER. Repeat this operation to input up to 10 characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases Moves the cursor in the arrow direction. " ": Removes a character on the left of the cursor. " ": Enters a space. • Pressing CLEAR on the remote controller will remove all the input characters. 2. After inputting, select "OK" with the cursors, and press ENTER. The input name will be saved. To restore the name to the default value, press CLEAR on the remote controller on the input screen. Then while nothing is entered, select "OK", and press ENTER. • To name a preset radio station, press TUNER on the remote controller, select AM/FM, and select the preset number. • This cannot be set if the "NET" or "BLUETOOTH" input is selected. 125 Front Panel≫ Rear Panel≫ Remote≫