Onkyo TX SR506 Owner Manual - Page 78
Powered Zone2 Setting, Notes, TX-SR576 only, Not Act
UPC - 751398008054
View all Onkyo TX SR506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Zone 2-Continued Powered Zone 2 Setting 3 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 77, you must set the Powered Zone 2 setting to Act (Activated). (TX-SR576 only) Use the Up and Down [ ]/[ ] buttons to select "7-2.Zone2," and then press [ENTER]. ENTER SETUP RECEIVER 4 5 1 Press the [RECEIVER] REMOTE 6 MODE button, followed by the [SETUP] button. Use the Up and Down [ ]/[ ] buttons to select "PwrdZ2.". Use the Left and Right [ ]/[ ] buttons to select: NotAct: ZONE 2 SPEAKERS L/R speaker terminals not activated (Powered Zone 2 disabled). Act: ZONE 2 SPEAKERS L/R speaker terminals activated (Powered Zone 2 enabled). Press the [SETUP] button. Setup closes. Notes: • When Act is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker termi- 2 Use the Up and Down [ ]/[ ] nals output sound, but the surround back speakers con- buttons to select "Hardware- nected to the SURR BACK L/R speaker terminals do Setup," and then press [ENTER]. not. When Act is selected and Zone 2 turned off, the If you have a TX-SR506, proceed to surround back speakers output sound as normal. step 4. • Powered Zone 2 cannot be used if Sp Type is set to Bi- Amp. • This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons. 78