Onkyo TX-SR605 Owner Manual - Page 88
Setting the Powered Zone 2, Using Zone 2 - hdmi not working
UPC - 051398007584
View all Onkyo TX-SR605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Zone 2-Continued Setting the Powered Zone 2 To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. 2 Use the Up and Down [ ]/[ ] buttons to select "7. Hardware Setup," and then press [ENTER]. The Hardware Setup menu appears. 7. Hardware Setup 1. Remote Control 2. Zone2 3. Tuner 4. Analog Multich 5. HDMI 5 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver/AV amplifier 12 3 4 88 Use the Up and Down [ ]/[ ] buttons to select "2. Zone2," and then press [ENTER]. 1 The Zone2 menu appears. 7-2. Zone2 Powered Zone2 Not Act Use the Left and Right [ ]/[ ] buttons to select: Not Act: ZONE 2 SPEAKERS termi- nals deactivated. Act: ZONE 2 SPEAKERS termi- nals activated. When Zone 2 is activated and turned on (see below), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURR BACK SPEAK- 2 ERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal). To turn on Zone 2 and select an input source, press the [ZONE 2] button repeatedly. Alternatively, press the [ZONE 2] button followed by an input selector button within 8 seconds. Zone 2 turns on and ZONE 2 indicator lights up. To select AM or FM press the [TUNER] input selector button repeatedly (TX-SR605 only). To select the same source as that of the main room, press the [ZONE 2] button repeatedly until "Z2 Sel: Source" appears. To turn off Zone 2, press the ZONE 2 [OFF] button.