Onkyo TX-SR707 Owner Manual - Page 106
Adjusting the Volume for Zone 2, Muting Zones, indicator and Zone 2 selector
View all Onkyo TX-SR707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Zone 2-Continued Notes: • Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it's connected to an analog input. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2. • When you connect Zone 2 speakers directly to the AV receiver, listening modes that require surround back speakers or front high speakers or front wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, THX Select2 Cinema, Dolby Pro Logic IIz height, and Audyssey Dynamic Surround Expansion™ are unavailable. • When the input selector of Zone 2 is selected, power consumption on standby mode slightly increases. • While Zone 2 is on, V functions will not work. Adjusting the Volume for Zone 2 Muting Zones Remote controller On the remote controller, press the [ZONE2] button, and then press the [MUTING] button. To unmute a zone, on the remote controller, press the [ZONE2] button, and then press the [MUTING] button again. Note: Zones can also be unmuted by adjusting the volume. Remote controller On the remote controller, press the [ZONE2] button, and then use the VOL [R]/[X] button. AV receiver On the AV receiver, press the [ZONE 2] button (the ZONE 2 indicator and Zone 2 selector on the display flashes) and use the [-]/[+] buttons within 8 seconds. Note: You can adjust the volume only when Powered Zone 2 is being used. 106