Onkyo TX-SR707 Owner Manual - Page 37
Connecting a Power Amplifier, Power amplifier, Powered subwoofer
View all Onkyo TX-SR707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Connecting the AV receiver-Continued Connecting a Power Amplifier If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the power amplifier. If you have a powered subwoofer, connect it to this AV receiver's PRE OUT: SUBWOOFER jack. You can connect the powered subwoofer with two PREOUT: SUBWOOFER jacks respectively. The same signal is output from each jack. Power amplifier 1234567 1. Front left speaker 2. Center speaker 3. Front right speaker 4. Surround left speaker 5. Surround right speaker 6. Surround back/Front wide/Front high left speaker* 7. Surround back/Front wide/Front high right speaker* Powered subwoofer See "Connecting a Powered Subwoofer" on page 17 for more information. Note: * Select audio channels that you want to output in "Speaker Configuration" (see page 80). Specify "None" for the channel that you don't want to output. 37