Onkyo TX-SR707 Owner Manual - Page 60

Basic Operations-Continued Changing Source Component When you want to operate the component that is not assigned as the source component, you can assign it as the source component. (3 seconds) While holding down the REMOTE MODE button, press and hold down the [MY MOVIE], [MY TV], or [MY MUSIC] button (about 3 seconds). The ACTIVITIES buttons that you pressed flashes twice, indicating that the setting has been established. Examples: When you press the [MY MUSIC] button and want to start the Onkyo Cassette recorder, while holding down [TV/TAPE] button, press and hold down the [MY MUSIC] button (about 3 seconds) flashes twice. Restoring Default 1 While holding down the [AUDIO] button, press and hold down the [ALL OFF] button until the [ALL OFF] button lights up (about 3 seconds). (3 seconds) 2 Release the [AUDIO] and [ALL OFF] buttons and press the [ALL OFF] button again. The [ALL OFF] button flashes twice. Switching Normal Macro Mode You can switch the AV receiver to normal macro mode from Easy macro mode, and vice versa. In the normal macro mode, you can use macro commands (see page 120). (3 seconds) While holding down the [RECEIVER] button, press and hold down the ACTIVITIES buttons (about 3 seconds). Note: Once the AV receiver has entered the normal macro mode, all of the ACTIVITIES buttons will automatically switch to the Normal macro mode. In this case, pressing the [ALL OFF] button will only set the AV receiver to Standby mode. 60