Optoma GT1080HDR EH412ST User Manual - Page 36

USING THE PROJECTOR Setup menu Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. Setup lamp settings menu Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reset Resets the lamp hour counter after replacing the lamp. Setup filter settings menu Filter Usage Hours Display the filter time. Optional Filter Installed Set the warning message setting. ‡‡ Yes: Display warning message after 500 hours of use. Note: "Filter Usage Hours / Filter Reminder / Filter Reset" will only appear when "Optional Filter Installed" is "Yes". ‡‡ No: Turn off warning message. Filter Reminder Choose this function to show or hide the warning message when the changing filter message is displayed. The available options include Off, 300hr, 500hr, 800hr, and 1000hr. Filter Reset Reset the dust filter counter after replacing or cleaning the dust filter. Setup power settings menu Direct Power On Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the "Power" key on the projector keypad or on the remote control. Signal Power On Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected, without pressing the "Power" key on the projector Keypad or on the remote control. Note: If the "Signal Power On" option is turned "On", the power consumption of the projector in standby mode will be over 3W. Auto Power Off (min.) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). 36 English