Optoma HD142X User manual - Page 51
Warning indicators
View all Optoma HD142X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red. "TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the project can be switched back on. "TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on (Warming) Power on and Lamp lighting Power off (Cooling) Quick Resume (100 secs) Error (Lamp failure) Error (Fan failure) Error (Over temp.) Standby State (Burn in mode) Burnin (Warming) Burnin (Cooling) Power LED (Red) Steady light Flashing Flashing Flashing Power LED (Green or Blue) Temp-LED (Red) Flashing (0.5 sec off / 0.5 sec on) Steady light Flashing (0.5 sec off / 0.5 sec light). Back to red steady light when cooling fan turns off. Flashing (0.25 sec off / 0.25 sec light) Flashing Flashing Flashing Flashing Steady light Lamp-LED (Red) Steady light Power off: Power Off Power Off? Press power key again. Lamp warning: Warning Lamp Warning Lamp life exceeded. English 51