Optoma PT105 User's Manual - Page 12

USING YOUR PROJECTOR HDMI On Screen Display (OSD ) HDMI After HDMI Video Source is connected . HDMI OSD may continue to display for a few seconds , until source detection is finished, and HDMI image appears on screen . HDMI Source Not Found If HDMI Video is not detected " HDMI Source Not Found " may appear. If this happens please check that HDMI Video Source is plugged in and is turned ON . Language menu 4 English I• Francais Deutsche Nederlands Espanol English 4 Francais I► Deutsche Nederlands Espanol English Francais 4 Deutsche Pe Nederlands Espanol English Francais Deutsche 4 Nederlands ' spar• English Francais Deutsche Nederlands 4 Espanol Use VOL+ and VOL- buttons to select language, English, Francais, Deutsche, Nederlands, Espanol. Audio Use A/ VOL+ or V/ VOL- Buttons to change the volume from the speaker, and Volume bar icons will be displayed for a short time when this is done. If the volume is reduced to minimum then Mute nicon will be displayed for a short time. After changing input source volume will be initially set to 20% for Component Video , Composite Video ,and HDMI , and to mute for PC VGA. Volume 4 Volume de-1 Mute aur p Reset to Factory Default Settings 4 and ► Buttons pressed simultaneously will set the projector settings to factory defaults. EN-11