Optoma UHD30 Optoma UHD30_UM - Page 38

USING THE PROJECTOR Keypad Lock When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the Keypad. Information Hide Enable this function to hide the information message. ‡‡ Off: Choose "Off" to show the "searching" message. ‡‡ Logo On: Choose "On" to hide the info message. Use this function to set the desired startup screen. If changes are made, they will take effect the next time the projector is powered on. ‡‡ Default: The default startup screen. ‡‡ Neutral: Logo is not displayed on startup screen. Background Color Use this function to display a blue, red, green, gray color, or none when no signal is available. HDMI 1.4 EQ Set the HDMI port EQ value for HDMI1.4. HDMI 2.0 EQ Set the HDMI port EQ value for HDMI 2.0. Note: ‡‡ ‡‡ ‡‡ ‡‡ HDMI EQ analyses the signal data and eliminates distortion due to signal loss when using long HDMI cables. The HDMI receiver also includes a timing adjustment circuit that removes timing jitter, restoring the HDMI signal to optimal transmission levels. 3840x2160@60Hz suggests using the HDMI cable under 5 meters/16 feet. If the HDMI cable is over 5 meters/16 feet, we strongly recommend using an Active Fiber HDMI Cable or Signal Booster/Repeater. 3840x2160@30Hz/25Hz/24Hz suggests using the HDMI cable under 15 meters/ 50 feet. If the HDMI cable runs under 15 meters/50 feet, most copper cables are acceptable. If exceeding 15 meters/50 feet or having signal sync issues, we strongly recommend using an Active Fiber HDMI Cable or Signal Booster/Repeater. To ensure the best image quality and avoid connection errors, we recommend the use of High Speed or Premium Certified HDMI cables up to 5 meters. Reset menu Reset OSD Return the factory default settings for OSD menu settings. Reset to Default Return the factory default settings for all settings. 38 English