Optoma X355 User manual - Page 68
Warning indicators, LED lightning messages
View all Optoma X355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red. "TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the project can be switched back on. "TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Standby state (Burn in mode) Power on (Warming) Burn in (Warming) Power on (Burn in mode) Power on and Lamp lighting Power off (Cooling) Burn in (Cooling) Quick Resume (100 secs) Error (Over temp.) Error (Fan failure) Error (Lamp failure) Power LED (Red) Steady light Flashing (0.5 sec off / 0.5 sec on) Flashing Flashing Flashing Power LED (Green or Blue) Temp-LED (Red) Flashing (0.5 sec off / 0.5 sec on) Flashing (0.5 sec off / 0.5 sec on) Flashing Flashing (0.5 sec off / 0.5 sec on) Steady light Flashing (0.5 sec off / 0.5 sec light). Back to red steady light when cooling fan turns off. Flashing Flashing (0.25 sec off / 0.25 sec on) Flashing (0.5 sec off / 0.5 sec on) Steady light Flashing Lamp-LED (Red) Flashing (0.5 sec off / 0.5 sec on) Steady light Power off: Power Off Power Off? Press power key again. 68 English