Optoma ZH420UST ZH420UST_UserManual - Page 41
SSI Settings, High Altitude, Optional Filter Settings, PIP-PBP Module, Projector ID, Information
View all Optoma ZH420UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
User Controls SSI Settings Refer to next page. High Altitude On: The built-in fans run at high speed. Select this option when using the projector at altitudes above 2500 feet/762 meters or higher. Off: The built-in fans automatically run at a variable speed ac- cording to the internal temperature. Optional Filter Settings Optional Filter Installed: Filter is installed or not. Filter Usage Hours: Hours of filter had been used. Filters Remind (Hour): Set the filter reminder time. Cleaning Up Remind: Select "Yes" to reset the dust filter hour counter after replacing or cleaning the dust filter. Information Model name, SNID, signal source, resolution, software version, aspect ratio, IP address, network status and other information on projector are displayed on the screen. PIP-PBP Module Version: Show PIP-PBP module software version. HDMI EQ: Set PIP-PBP module HDMI port EQ value. Reset: Reset the PIP-PBP module. USB Upgrade: Upgrade the PIP-PBP module software. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. English 41