Oster FPSTFP4250 English - Page 8

How to Chop - food processor

Page 8 highlights

How to Chop NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time. 1 Lock the bowl onto base. (See "How to assemble the bowl") 2 Grasp the chopping blade by its base and slide it onto the center post. (Figure 8) 3 Place food into bowl. 4 Lock cover onto bowl. (See "How to Lock the cover") 5 Lock the Food Chute Lid. (See "How to Lock the Food Chute Lid"). Insert Small Food Pusher into Large Food Pusher. Figure 8 6 Plug the cord into an electric outlet. Use the Food Guide to prepare food for chopping. 7 Press Pulse to run unit (or press ON for continuous processing). When pulsing, hold the Pulse button for 2-3 seconds, check results, repeat if desired. 8 When finished processing, release the Pulse button, or if you were using continuous ON, press OFF, allow the chopping blade to stop rotating. 9 Take out the Small Food Pusher. Twist the cover towards to unlock mark to remove. 10 Hold the Chopping Blade by its base and remove. Unlock the bowl by turning it clockwise towards the UNLOCK mark, and lift off. Empty the processed food. NOTE: Chopping Blade is very sharp, use caution when handling. 8 www.oster.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

www.oster.com
8
How to Chop
NOTE:
Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for more
than 3 minutes at a time.
1
Lock the bowl onto base.
(See “How to assemble the bowl”)
2
Grasp the chopping blade by its base
and slide it onto the center post.
(Figure 8)
3
Place food into bowl.
4
Lock cover onto bowl.
(See “How to Lock the cover”)
5
Lock the Food Chute Lid.
(See “How to Lock the Food Chute Lid”).
Insert Small Food Pusher into Large
Food Pusher.
6
Plug the cord into an electric outlet.
Use the Food Guide to prepare food
for chopping.
7
Press Pulse to run unit (or press ON for continuous processing). When pulsing,
hold the Pulse button for 2–3 seconds, check results, repeat if desired.
8
When finished processing, release the Pulse button, or if you were using
continuous ON, press OFF, allow the chopping blade to stop rotating.
9
Take out the Small Food Pusher. Twist the cover towards to unlock mark
to remove.
10
Hold the Chopping Blade by its base and remove. Unlock the bowl by turning
it clockwise towards the UNLOCK mark, and lift off
. Empty the processed food.
NOTE:
Chopping Blade is very sharp, use caution when handling.
Figure 8