Palsonic PDP5010 Owners Manual - Page 8

Preparations Antenna Connection INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Note: It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise that may occur due to radio wave conditions. The aerial cable should not be bundled with the power cord and the like. Speaker Connection (Black) (Red) SPEAKER Power Connection AC-INPUT (Black) (Red) Connect the speaker audio cable to the external speaker output jack on the unit matching the "+" and "-" ends of the cable. Note: 1. Unplug the plasma display and all connected components before connecting the Speakers. 2. The illustration may be different depending on model. Plug into AC outlet AC cord Household power outlet 1. Connecting the female plug to the AC socket on the unit. 2. Connecting the male plug to the wall outlet as illustrated. Note: This product should be operated only from the type of power source indicated on the marking label. Always unplug the AC cord from power outlet when not using for a long period of time. The illustration of the AC plug is for your reference only. 6