Panasonic 16 000lm / 1080p / 3-Chip DLP™ Projector Operating Manual - Page 122
[UNIFORMITY], [SHUTTER SETTING], Setting each color, Setting [PC CORRECTION]
View all Panasonic 16 000lm / 1080p / 3-Chip DLP™ Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 4 Settings - [DISPLAY OPTION] menu Note ff The startup logo will disappear in approximately 15 seconds. ff To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM. [UNIFORMITY] Correct the brightness and color unevenness of the entire screen. Setting each color 1) Press as to select [UNIFORMITY]. 2) Press the button. ffThe [UNIFORMITY] screen is displayed. 3) Press as to select [WHITE], [RED], [GREEN], or [BLUE]. 4) Press qw to adjust the level. Item [VERTICAL] [HORIZONTAL] Operation Press w. Press q. Press w. Press q. Adjustment The lower-side color becomes pale, or the upper-side color becomes dark. The upper-side color becomes pale, or the lower-side color becomes dark. The left-side color becomes pale, or the right-side color becomes dark. The right-side color becomes pale, or the left-side color becomes dark. Range of adjustment -127 - +127 Setting [PC CORRECTION] (Only for PT‑DZ21K2, PT‑DS20K2) To use the [PC CORRECTION] function, the optional Upgrade Kit (Model No.: ET‑UK20) is required. To purchase the product, consult your dealer. 1) Press as to select [UNIFORMITY]. 2) Press the button. ffThe [UNIFORMITY] screen is displayed. 3) Press as to select [PC CORRECTION]. 4) Press qw to switch the item. [OFF] [ON]*1 Does not perform correction using a computer. Performs correction for the brightness and color unevenness of the entire screen using a computer. *1 Advanced skills are necessary to use computer control correction. Consult your dealer. Note ff [UNIFORMITY] can be set for each [LAMP SELECT] setting. ff The [UNIFORMITY] setting value will not return to factory default even if [ALL USER DATA] is executed from the [PROJECTOR SETUP] menu → [INITIALIZE] (x page 143). [SHUTTER SETTING] Set image fade-in and fade-out when the shutter function operates. Also, the shutter function can be automatically enabled/disabled (shutter: closed/open) when the power is turned off/on. Setting [FADE-IN] or [FADE-OUT] 1) Press as to select [SHUTTER SETTING]. 122 - ENGLISH