Panasonic AG-AF100A Operating Instruction - Page 107
S/s Sw Inh, Wave/vector
View all Panasonic AG-AF100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Menu SW MODE screen (continued) Item USER1 SW USER2 SW USER3 SW WFM S/S SW INH FACE FRAMING Display mode (Camera) (PB) (Camera) (PB) (Camera) (PB) (Camera) (Camera) (Camera) Description of settings Sets the function assigned to the USER1 button. INH: No function is assigned REC CHECK: Performs recording check. FACE DETECT: This is the face detection function. Performs the AUTO IRIS / AUTO FOCUS operation centering around the detected face. Enabled when both focus control and iris control are set to auto. FA: Displays the edges in red. (Only for LCD/EVF) During operation, the LCD/EVF borders are displayed in red. CAPTURE: Records still images. Does not operate during movie recording and when the PRE REC function is in use. ATW: Switches the ATW function ON or OFF. ATW LOCK: Fixes the white balance value when the button is pressed during ATW. Press again to perform ATW. SHOT MARK: Shot mark recording. (Page 13) Takes effect during recording, thumbnail display, and clip display. INDEX: Index recording (Page 13) Takes effect during recording. LAST CLIP: Deletes the last recorded clip. (Page 13) • After recording, clips cannot be deleted by switching to PB or PC mode, by changing the recording format, or by turning off the camera. BACKLIGHT: Auto iris control for the backlight compensation. SPOTLIGHT: Switches auto iris control ON or OFF for the spotlight. BLACKFADE: Blackfade (Page 11) WHITEFADE: Whitefade (Page 11) Assign a function to the USER2 button. The setting contents are the same as USER1. ATW LOCK Assign a function to the USER3 button. The setting contents are the same as USER1. REC CHECK Switches the waveform display that appears when the WFM button is pressed. WAVE: Displays as a waveform. VECTER: Displays as a vector. WAVE/VECTOR: Each time the button is pressed, the setting changes in the following order: OFF → WAVE → VECTOR → OFF. 1: Disables the START/STOP1 SW. 2: Disables the START/STOP2 SW. NO: D oes not disable any switch. Use to prevent erroneous operation of the unnecessary START/STOP SW. Frames the faces detected during operation of the FACE DETECT function with the USER SW. The maximum number of detected frames is 15, and faces bigger and closer to the center of the screen are given priority. OFF: Frames are not displayed. PRIMARY: Only the high-priority frames are displayed. ALL: Cannot be set when you are using INTERVAL REC. indicates the factory setting. 55