Panasonic AG-AF100A Operating Instruction - Page 108
Recording Setup Screen, Off, 1second, 1minute
View all Panasonic AG-AF100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Setup menu list (continued) RECORDING SETUP screen Item PREREC MODE Display mode (Camera) INTERVAL REC (Camera) RELAY REC (Camera) PH AUDIO MODE (Camera) MIC ALC (Camera) MIC GAIN1 (Camera) MIC GAIN2 (Camera) Description of settings Sets PRE RECORDING to ON or OFF. ON: Enables PRE REC function. OFF: Disables PRE REC function. • TCG is set to FREE RUN. • Cannot be set when you are using INTERVAL REC. Scenes moving slowly over a long period of time are recorded as short movies by providing a recording interval. One frame is recorded in each recording time period that has been set, and 24 frames (PAL 25 frames) form a one-second video. When you set INTERVAL REC, the following items are set automatically: PH Mode 1080/24P (When SYSTEM FREQ = 59.94) 1080/25P (When SYSTEM FREQ = 50) • TC RECRUN Fixed to NDF • Audio recording is not performed. OFF, 1SECOND, 10SECONDS, 30SECONDS, 1MINUTE, 2MINUTES ON: Relay recording performed. When the SD card used for recording has no remaining space, recording continues in another SD card if an SD card that can be used for recording is inserted in another SD card slot. OFF: Relay recording not performed. Recording stops when the target SD card has no remaining space. Selects the format of audio recording when REC FORMAT = PH. LPCM: Recording is performed in uncompressed LPCM. AC3: Recording is performed in Dolby AC3 format. • Fixed to AC3 for other than the PH mode. • If LPCM is set, playback is not possible in our previous models, such as AG- HMR10. ON: Enables mic level auto control. OFF: Disables mic level auto control. Audio distortion can be reduced at high input levels. To adjust the recording level of audio signals (regardless of this setting), use the AUDIO control knobs. Sets the input level of the external microphone connected to the INPUT 1 terminal. -50dB, -60dB Sets the input level of the external microphone connected to the INPUT 2 terminal. -50dB, -60dB indicates the factory setting. 56