Panasonic AG-AF100A Operating Instruction - Page 98

Screen displays (continued) • The AWB error message (LOW LIGHT / LEVEL OVER) is displayed. (Page 42 of Vol.1) • The functions allocated to the USER buttons are displayed while you hold down the DISP/ MODE CHK button. 6 Microphone level automatic control display Appears when in the setup menus, RECORDING SETUP screen, MIC ALC, you have selected "ON". 7 Marker luminance display When markers are displayed, the brightness level around the center of the screen is indicated as 0% to 99%. "99%↑" appears if the percentage is over 99. • When the AREA Y-GET function is operating, the brightness level around the center of the AREA frame is displayed. 8 Date and time display Month Day of the month Year: 2001 - 2039 Hours Minutes Seconds mmm dd yyyy hh:mm:ss 9 Frame rate display Displays recording frame rate. Not displayed when set to 1080/60i. 10 Shutter speed display The shutter speed is displayed here. 11 Audio level meter display (Page 18) 12 Auto iris control display STD: Standard auto-iris control SPOT: Auto iris control for spotlight BACK: Auto iris control for backlight compensation 13 Iris display Displays F value. The STEP of the display value differs depending on the lens. 14 Zoom position display The zoom poison is displayed with Z00 (maximum wide-angle) - Z99 (maximum zoom). The unit can be switched to mm in the ZOOM & FOCUS item of the setting menu DISPLAY SETUP screen. The focus position display does not move linearly. 46 15 Focus control information display Displays the focus control information with 99 - 00. In the auto focus mode, AF appears. In the manual focus mode, MF appears. The units can be switched between feet and m in the ZOOM & FOCUS item of the setting menu DISPLAY SETUP screen. The focus position display does not move linearly. 16 ND filter display ND filter selected is displayed. 17 Gain display Displays the gain value of the image amplifier configured. (During the auto mode, AGC is displayed.) 18 AWB information display Displays the information of white balance. ATW: When ATW is set P3.2K/P5.6K/VAR: In the case of preset Ach/Bch: In the case of A/B LOCK: When ATW is locked 19 Marker display During shooting, pressing the ZEBRA button once or twice will display the marker. 20 Optical Image Stabilizer display Displayed when Optical Image Stabilizer is ON. 21 Scene filename display (Page 19) 22 Remaining battery capacity display When using Panasonic-manufactured batteries compatible with this product, the remaining battery capacity is displayed in minutes. Time remaining will be displayed after a brief pause. • The battery display will change → → → → as battery capacity decreases. will be displayed in red when less than 3 minutes are remaining, and will flash when the battery is empty. (Continued on the next page)